Skip to Content

Feed Crusher Mixer Is Properly Installed And Used

Feed Crusher Mixer Is Properly Installed And Used

Submitted by • July 11, 2019 limafeedmachine.com

Feed crusher mixer is properly installed and used
First, the correct installation
1. The pulverizing mixer must be fixedly installed, and the axis of the pulverizer pulley and the power pulley should be parallel. The two transmission pulley grooves must be on the same straight line. Otherwise, not only the damage of the mechanism but also the belt can be easily lost.
2. If the pulley needs to be modified, it must be calculated to meet the needs of the spindle speed of the crushing
mixer. Do not increase the spindle speed arbitrarily. When the speed rating is 15%, it will cause severe vibration
of the machine.
3. It is necessary to carefully clean the raw materials in advance, and if necessary, screen or select them to prevent iron pieces and stones from entering the machine.
4. Before each use, open the pulverizer cover and check the various parts of the machine for damage, especially if the cotter pin on the rotor is intact and the connection is loose. When the confirmatio

Voted by:
Voted by lanpusxr

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>